How to Replace a Norcold Cooling Unit

Norcold Refrigerators Are One of the Most Popular RV Cooling Units

norcold Refrigerators are a top choice for many motorhome owners. They are durable, energy-efficient and easy to use.

They come in a variety of sizes and have a number of features to meet your needs. They are available in a variety of colors and have built-in temperature controls to keep your food fresher longer.

How to Replace a Norcold Refrigerator’s Cooling Unit

Replacing the cooling unit on a Norcold refrigerator can be a simple task if you know how to do it. There are a few steps that you should follow to make sure the process goes smoothly.

First, you should remove the old cooling unit. This may require removing the refrigerator, disconnecting it from its electric power source and then removing the screws securing the old unit. Once the unit is out, you can take it apart to gain access to the evaporator.

Second, you should clean the inside of the fridge and remove any debris from the evaporator that may have collected over time. This will help prevent rust and corrosion from developing.

Once the evaporator is clean, you can replace the cooling unit on your Norcold refrigerator. Be sure to follow the instructions that came with your replacement unit and read the manual carefully.

You should also use a foam sealant and thermal mastic to bond the back of the new cooling unit to the fridge’s interior side. This will help prevent leaks from happening during the installation process.

Thermo-Mastic is a strong, moisture-resistant, rubberized adhesive that provides a tough and durable bond between the back of the refrigerator and the new cooling unit. It is a good idea to use a thick coat of this product to help ensure a tight bond.

Lastly, be sure to check the wiring before you replace the cooling unit on your Norcold RV refrigerator. The wires can become tangled or loose, which can lead to problems during the installation process.

If the wiring is tangled or loose, it can be difficult to connect the new cooling unit to the refrigerator’s electrical power source. You should remove all of the fuses from the old cooling unit before you install the new one.

Once the new cooling unit is installed, you should run it for about a week to let the fluids settle and mix in properly. This will allow the new unit to operate at full capacity. This is especially important if you have installed an ARP Control on your unit.